Bluetooth is a widely used protocol for wireless audio connection to servers. Almost everyone who uses Bluetooth is on his or her mobile devices and systems. Using a Bluetooth device in a Linux distribution can be a bit complicated the first time. If you are an Arch-Linux user, you may get confused when setting up Bluetooth on your server.
The configuration of Arch Linux Bluetooth is difficult compared to other Linux distributions. This is why novice programmers have problems setting up Bluetooth. Nowadays everyone tends to use headsets and Bluetooth, so it is important to know the setup process, even if you are new to Arch Linux.
The steps described in this manual will help you successfully set up Bluetooth on your Arch Linux system. If you follow all the instructions in this guide, you can enjoy all the benefits of Bluetooth on your Arch Linux desktop.
Membership process
You can establish the connection between your Bluetooth device and your server in just a few steps. To connect Bluetooth devices to the Arch-Linux system, the following three processes must be carried out:
- Step one: Installation services of utilities
- Step two: Activate the Bluetooth service
- Step three: Couple with Arch-Linux
You can then continue to configure the Bluetooth device settings on your system if there are no pop-up errors due to the compatibility of the server protocol.
Requirements
The only requirement for setting up Bluetooth on your system is that a sudo user can log in as root. You need to make sure your system has a Bluetooth adapter. Attaching the Pacman package makes it easier to install the tools.
Utility Installation
First you need to install utilities for your Bluetooth device. Programmers generally choose the bluman, blue and blue utilities. Type the following commands to get these utilities on your Arch Linux system:
$ sudo pacman -S bluez-utils
To define the loading of the Btusb module, enter the following command into your terminal :
The last step in this process is to find an adapter. Type the following command to find the adapter in your system:
$ sudo nano /etc/bluetooth/main.conf
The following command informs you whether an adapter is connected or locked.
If your adapter blocks the connection, type the following command to disconnect.
$ sudo rfkill unlock bluetooth
Enabling Bluetooth
Only two commands are required to activate the Bluetooth service. One command activates Bluetooth, while the other automatically activates the system on the Arch Linux system. Enter the following commands to activate the Bluetooth connection in your system.
start sudo systemctl bluetooth.service
$ activate sudo systemctl bluetooth.service
After these commands your Bluetooth system will be launched in Arch Linux. These controls provide access to the startup and start-up functions.
Bluetooth coupling device
In this last step, install a pair of Bluetooth devices and connect to the audio system. The coupling does not require complex control. However, for audio connection and troubleshooting, you must enter certain commands into the Arch-Linux connection system.
To perform the pairing, navigate to the device in the window that is currently open when the function is activated. Select the device and press the Enter key. You will see the pairing screen; pair the device and click Next. The congratulations screen informs you that your device has been successfully linked to the server.
It’s time to connect the sound from your server to the paired device. The audio connection allows your device to connect to all the audio functions of your Arch Linux server. You can listen to music, sound, video and other audio items. Type the following commands to connect the sound from your server to the paired device:
$ sudo pacman -S pulse audio
$ sudo pacman – Pulse Audio Bluetooth
The above commands allow you to install the PulseAudio extension for your Bluetooth. To start the function, execute the following command.
$ sudo systemctl Start pulse
Performs the second command to execute the PulseAudio function automatically.
For a utility that provides easy access to forward and backward functions, type the following command. You can move songs or music and adjust the volume without using buttons. This utility is an excellent function and will be useful when using the Bluetooth function.
$ sudo pacman -S pavucontrol
If your system adjusts the enhanced audio distribution profile, there may be protocol connection errors. If you are a GDM user, execute the following commands:
$ cd ~/src
$ git clone https://aur.archlinux.org/pulseaudio-bluetooth-a2dp-gdm-fix.git
$ makepkg -i
That’s it! You can now use a Bluetooth device remotely connected to the Arch Linux server.
Conclusion
There is no doubt that, unlike other servers, setting up a Bluetooth device on an Arch-Linux system requires encryption. However, it is still possible to compare this configuration with other applications on Linux. Those who use Arch Linux as their main operating server will find it convenient to install Bluetooth. Just follow the three main steps mentioned in this article to use Bluetooth devices with the Linux desktop. You can skip the setting of the device parameters after adjusting the sound if your device can be adjusted to the Arch-Linux server settings. You can also skip the process of checking the lock in the adapter socket if all goes well. This guide is designed to help beginners using Arch Linux set up a Bluetooth configuration with their server.
Related Tags:
waiting to connect to bluetoothd,bluetoothctl no default controller available,arch bluetooth protocol not available,bluetoothctl command not found,arch restart pulseaudio,blueman applet arch linux,unit bluetooth.service could not be found,pulseaudio bluetooth,pulseaudio bluetooth raspberry pi,failed to set-card-profile to a2dp_sink,pulseaudio-bluetooth-a2dp-gdm-fix,failed to change profile to headset_head_unit,bluetoothctl,bluetoothctl waiting to connect to bluetoothd,linux list bluetooth devices,bluez,arch linux bluetooth connection failed,linux bluetooth driver,bluetoothctl arch
